Floor Paint

Epoxy floor paint applied and it looks like parts are glossy and parts look flat. The contractor applied the flake chips at the end. What do I do?

Read More

Old house thick, flaking paint

My old house has lath and plaster walls that have been repainted many times. When the paint peels it exposes the bare, grainy plaster underneath. Do I need to prime this before spackling ? If so, with what? Thanks

Read More

Exterior Door Paint Cracking

I have a pre-primed metal exterior door that I have painted. The first side took four coats and looks good. On the opposite side, I put down one coat and let it dry and then applied a second coat about a week later. The second coat looks like it has

Read More

Siding out of reach.

I have almost finished painting the outside of the house but have two areas up high out of reach of my 24 foot ladder. I tried to roll it with a long roller but not working due to horizontal siding. I am a little reluctant to go up high on

Read More

Paint Roller Nap

When using a new paint roller, I get lots of loose fibers that come off the roller and ruin the paint job. How do you get rid to the fibers from being pulled off the roller and on to the painted surface?

Read More

Painting semi-gloss trim and priming.

My project is painting lots of windows 3-4′ wide and 6-8′ tall(6″ trim), doors (6″ trim) and base molding (8″ and 10 “) in a 100 yr. old house that currently has semi gloss paint. Are there any primers that really work where they state you can prime over gloss

Read More

HOUSE PAINTING SEARCH

Trending posts

Subscribe

Don’t miss our future updates! Get Subscribed Today!