I painted an accent wall a few days ago and when I took off the painters tape the edge between the wall and the ceiling left a heavy thick line and the transition looks so bad. I know I applied the paint too thick so how do I soften up

I had problems with the Benjamin Moore paint also. I started out in my hall using the regal pearl (rec. by paint store). I had nothing but roller streaks. Second coat I tried to use more paint, it was worse then the first coat. Back to the paint store, complained,

I painted my ceiling with Behr Ceiling Paint and a good Purdy roller. When the paint dried the ceiling looked blotchy as if spots were missed all over the ceiling. What could cause this?

9″ 3/8 roller. After first coat, nap marks, roller marks, etc. Tried to correct, but only got worse. What’s the best way to smooth out walls with second coat?

We removed a large bathroom mirror, and had the wall professionally painted (well, if you call what they did painting). The wall looks awful because you can still see the mirror outline. I am guessing due to several coats of paints over the years (about 30 years old). What is

We primed our ceiling with Bin oil based primer and then pained two coats of ceiling paint over it. There were a lot of roller marks on the ceiling when we primed it but thought the paint would cover over them. Unfortunately that did not happen and now you can

I’m painting a ceiling. Can I say do half let it dry and do other half tomorrow? Or will I end up with marks that stand out due to me not doing whole surface at once?

I started to paint my kitchen with my husband and let him take over while I went to work and after it had dried the red walls were different colors. I want to know if I need to start over and paint the walls again with a primer and then

Tried touch-up of freshly painted wall and is highly noticeable – what can I do? Hallway/stairs was painted (applied by roller) a few days ago with Valspar Signature High Definition paint (eggshell finish). Needed to touch up a 1 ft area (wall patch was not fully sanded smooth and noticeable)

I need some expert help. I just had my basement finished. They put knockdown texture on the ceiling. I put a coat of drywall primer on the ceiling and then painted it with three coats of Sherwin-Williams Brilliance ceiling paint. That left streaks everywhere. I thought maybe the problem was