I have used Magic stripper for a fiberglass door and it removed most of the stain, but there is still a lot on the door. What else can I use on the door so it will make it look smooth so i can restain it.
© 2024 House Painting Info . All rights reserved.
2 Responses
Try lacquer thinner. Soak the fiberglass with lacquer thinner, let it work for a few minutes then use a nylon scrub pad to loosen the remaining stain. You will have to apply the lacquer thinner often due to evaporation. If some stain is still left in the wood grained areas use a small nylon scrub brush to work these areas. After the stain has dissolved simply wipe it off.
The lacquer thinner will evaporate quickly so working in sections is a good idea. Don't worry if a little stain is remaining in the wood grained area. This will be covered up by your new stain.
Try lacquer thinner. Soak the fiberglass with lacquer thinner, let it work for a few minutes then use a nylon scrub pad to loosen the remaining stain. You will have to apply the lacquer thinner often due to evaporation. If some stain is still left in the wood grained areas use a small nylon scrub brush to work these areas. After the stain has dissolved simply wipe it off.
The lacquer thinner will evaporate quickly so working in sections is a good idea. Don't worry if a little stain is remaining in the wood grained area. This will be covered up by your new stain.