I have just spent the last three weeks painting the fellowship hall at my church and it looks wonderful but when I started to remove the painters tape from the door handles it pulled off some of the new paint and primer. Which required repainting. Is there a trick to

What size of paint roller cover do I use for hand-troweled walls? I bought 3/4″ and I think it is too thick. It is a Wooster which seems good quality.

When I use my airless sprayer the pattern has two heavy paint lines on the outer edges of the spray pattern.

We have a two story home, the windows, and roof trim on the 2nd floor are set back so that we need to place a ladder on the roof to reach them. What is a safe way to set up ladders so we won’t damage the roof or slide down

Which is the brush for paint, 100% China Bristle or Poly/Nylon? Are both types of brushes good for all the paints or some brushes are good for some paints or another?

I have a Black and Decker Orbital sander. It was used without a sanding disk and the pad is slightly worn. I have tried a conversion hook and loop stick on, the glue melted off in 3 min and it fell off. I also tried the peel and stick, it

I bought a new 50mm Legend Pal paint brush and it has started to spread out in the middle. I leave it in a 4 liter paint pot on a pot hook with water just below the ferrell when not using it. When using it in acrylic it retains its

In one of your answers, you said to use a weenie roller. What is that?

I am considering starting my own painting business and I am in the market to buy a washer. I am not sure which specs to buy. In your article you say 2500 psi is plenty. Do I just go with this max? When I called the store I was shopping

I used blue tape to mask off the trim before painting, now the tape is stuck to the trim, at the edge that meets the wall, any easy way to get the seized masking tape off?